Why does this not return a second eph2
Posted: Sat May 01, 2021 2:04 pm America/New_York
From original MOD00.P2021118.1555_1.PDS.bz2
Why does this not return a second eph2?
modis_atteph.py -d ./MOD00.P2021118.1555.BERMUDA_FULL.L1A_LAC
Aqua
Aqua
att1=/shares/cms_optics/apps/seadas/seadas-7.5.3/ocssw/var/anc/2021/118/PM1ATTNR.P2021118.1400.003
att2=/shares/cms_optics/apps/seadas/seadas-7.5.3/ocssw/var/anc/2021/118/PM1ATTNR.P2021118.1600.003
eph1=/shares/cms_optics/apps/seadas/seadas-7.5.3/ocssw/var/anc/2021/118/PM1EPHND.P2021118.1200.003
And then fails with modis_GEO.py ./MOD00.P2021118.1555.BERMUDA_FULL.L1A_LAC -o ./MOD00.P2021118.1555.BERMUDA_FULL.GEO --threshold=95 --ancdb=./ancillary_data.db
STATUS: $ocssw_return_2 = MODIS GEO version 6.1.0, built Aug 16 2019 12:46:24
scan: 0 out of 190 Sat May 1 13:31:08 2021
...
scan: 180 out of 190 Sat May 1 13:31:17 2021
Percent valid data (78.00) is less than threshold (95.00)
ERROR: MODIS geolocation processing failed. Percent valid data (78.00) is less than threshold (95.00)
Why does this not return a second eph2?
modis_atteph.py -d ./MOD00.P2021118.1555.BERMUDA_FULL.L1A_LAC
Aqua
Aqua
att1=/shares/cms_optics/apps/seadas/seadas-7.5.3/ocssw/var/anc/2021/118/PM1ATTNR.P2021118.1400.003
att2=/shares/cms_optics/apps/seadas/seadas-7.5.3/ocssw/var/anc/2021/118/PM1ATTNR.P2021118.1600.003
eph1=/shares/cms_optics/apps/seadas/seadas-7.5.3/ocssw/var/anc/2021/118/PM1EPHND.P2021118.1200.003
And then fails with modis_GEO.py ./MOD00.P2021118.1555.BERMUDA_FULL.L1A_LAC -o ./MOD00.P2021118.1555.BERMUDA_FULL.GEO --threshold=95 --ancdb=./ancillary_data.db
STATUS: $ocssw_return_2 = MODIS GEO version 6.1.0, built Aug 16 2019 12:46:24
scan: 0 out of 190 Sat May 1 13:31:08 2021
...
scan: 180 out of 190 Sat May 1 13:31:17 2021
Percent valid data (78.00) is less than threshold (95.00)
ERROR: MODIS geolocation processing failed. Percent valid data (78.00) is less than threshold (95.00)