Low reflectances after l2gen processing of VIIRS SDR from CSPP

Please enter here to ask a question about any NASA Science related topics!
Post Reply
pmlrsg
Posts: 5
Joined: Tue Feb 18, 2020 5:50 pm America/New_York

Low reflectances after l2gen processing of VIIRS SDR from CSPP

by pmlrsg » Wed Jul 21, 2021 12:50 pm America/New_York

Hi there,

We are trying to set up a NRT processing chain for Suomi-VIIRS data we acquire at level 0. We are using CSPP to process it from level 0 to level1, then l2gen for processing the resulting VIIRS SDR up to level 2. The l1->l2 step is done as follows:

input_file="SVM01_npp_d20210618_t1149598_e1204126data.L1B.h5"
geo_file="GMTCO_npp_d20210618_t1149598_e1204126data.L1B.h5"
ofile="M2021164.oc_products.data.nogains.NRTanc.nc"
source $OCSSWROOT/OCSSW_bash.env

l2gen ifile=$input_file geofile=$geo_file ofile= $ofile calfile="" gain="1,1,1,1,1,1,1,1,1,1"

The resulting Rrs are way lower than we'd expect, particularly when compared with the equivalent level 2 file from your catalogue, see example figure attached for the 443 nm band. We were wondering if we are missing anything on the l2gen step?

Many thanks in advance!

Silvia
Last edited by pmlrsg on Thu Jul 22, 2021 3:08 am America/New_York, edited 1 time in total.

Tags:

LAADS_UserServices_M
User Services
User Services
Posts: 29
Joined: Mon Sep 30, 2019 8:33 am America/New_York

Re: Low reflectances after l2gen processing of VIIRS SDR from CSPP

by LAADS_UserServices_M » Wed Jul 21, 2021 2:59 pm America/New_York

There is no attachment with the post.

pmlrsg
Posts: 5
Joined: Tue Feb 18, 2020 5:50 pm America/New_York

Re: Low reflectances after l2gen processing of VIIRS SDR from CSPP

by pmlrsg » Thu Jul 22, 2021 1:58 am America/New_York

Let's try attaching it again then.
Attachments
CSPP_l2genvsNASA_M2021164_1245_Rrs_443.jpg
CSPP_l2genvsNASA_M2021164_1245_Rrs_443.jpg (328.3 KiB) Not viewed yet

LAADS_UserServices_M
User Services
User Services
Posts: 29
Joined: Mon Sep 30, 2019 8:33 am America/New_York

Re: Low reflectances after l2gen processing of VIIRS SDR from CSPP

by LAADS_UserServices_M » Thu Jul 22, 2021 8:27 am America/New_York

Dear Silvia:
Your question is related to data processing done in NOAA's Interface Data Processing Segment (IDPS), which receives raw instrument data and telemetry from ground stations supporting the Suomi NPP mission. The IDPS converts the Level 0 Raw Data Records (RDRs), generated by sensors on Suomi NPP, into calibrated geolocated Level 1 measurements called Sensor Data Records (SDRs), and then into Level 2+ geophysical parameters or Environmental Data Records (EDRs). or the Community Satellite Processing Package (CSPP)

Here at NASA VIIRS SIPSs we do not use CSPP but our re-worked VIRS code that generate 6-min products: 1 radiometric L1B file and 1 geolocation file in each of the 3 resolutions (IMG, MOD, & DNB). Also, we do not separate spectral bands.

So, you may want to contact the Community Satellite Processing Package (CSPP) at https://cimss.ssec.wisc.edu/cspp/ or NOAA’s VIIRS at https://ncc.nesdis.noaa.gov/VIIRS/index.php.

Regards,
LAADS Users Support

pmlrsg
Posts: 5
Joined: Tue Feb 18, 2020 5:50 pm America/New_York

Re: Low reflectances after l2gen processing of VIIRS SDR from CSPP

by pmlrsg » Thu Jul 22, 2021 8:36 am America/New_York

Thank you for your answer. We are well aware of the differences between your system and NOAA's.

The question about why l2gen results in incorrect Rrs when applied over CSPP-derived L1 still stands, unless the answer is that l2gen is not longer compatible with L1 files generated in such a way?

OB.DAAC - SeanBailey
User Services
User Services
Posts: 1198
Joined: Wed Sep 18, 2019 6:15 pm America/New_York
Answers: 1

Re: Low reflectances after l2gen processing of VIIRS SDR from CSPP

by OB.DAAC - SeanBailey » Thu Jul 22, 2021 10:18 am America/New_York

Silvia,

Since you got a result, it's not that l2gen is no longer compatible with the SDR input, rather the issue is that the on-orbit calibration differs between the IDPS (and thus CSPP) processing and the NASA VIIRS L1 processing (as would any vicarious calibration, which I see you disabled by setting the gains to unity). If you choose to use the NOAA SDR product as input to l2gen, you will have to derive a set of vicarious calibration coefficients to use with it.

Regards,
Sean

pmlrsg
Posts: 5
Joined: Tue Feb 18, 2020 5:50 pm America/New_York

Re: Low reflectances after l2gen processing of VIIRS SDR from CSPP

by pmlrsg » Fri Jul 23, 2021 5:33 am America/New_York

Many thanks, Sean!

I agree 'compatible' wasn't the right word. What I meant was that, in the past (I'm talking about ~7 years ago, CSPP VIIRS SDR v2.0), it was enough to set the gains to 1 to get reasonable numbers out of l2gen from such an CSPP-derived input. In retrospective, it was very naive of us to expect the calibration to remain the same after all this time.

We don't have much choice regarding the processing chain, so we'll start looking at deriving a custom SVC.

Thanks again and kind regards,

Silvia

Post Reply