I would like to use the l2gen command to run the PML algorithm.
As far as I have checked, SEAWIFS and MODIS seem to provide a lookup table for the PML algorithm.
However, there is no parameter file for the PML algorithm.
How can I get the PML algorithm to work properly?
Thank you very much for your help.
(### is a short hand for all the wavelength, so a_443_pml will give you total absorption at 443nm)
When I run l2gen with PML parameters, I got segmentation fault in the middle of the run(Other algorithms such as QAA are working fine). Is this a problem with my research environment? I am currently running Linux on a virtual box.
Here is the output.
Loading default parameters for SeaWiFS from /home/matsushita/OCSSW/ocssw/share/seawifs/msl12_defaults.par
Loading parameters for suite PML from /home/matsushita/OCSSW/ocssw/share/seawifs/msl12_defaults_PML.par
Loading command line parameters
The following products will be included in test_pml.nc.
Processing scan # 0 (1 of 479) after 0 seconds
chl_hu: using 443.00 555.00 670.00
Loading PML IOP model config file: /home/matsushita/OCSSW/ocssw/share/common/pml.cfg
Segmentation fault (Core damped)
In a future release, we may modify the SeaBASS reader to allow it to read the view geometries, but for now, the answer is l2gen can't do what you want it to do.