Methane data

Use this Forum to find information on, or ask a question about, NASA Earth Science data.
Post Reply
stanislaus
Posts: 1
Joined: Thu Mar 26, 2020 7:57 pm America/New_York
Answers: 0

Methane data

by stanislaus » Thu Mar 26, 2020 8:05 pm America/New_York

Please, I need access to global atmospheric methane dataset.

Tags:

ASDC - mcook
User Services
User Services
Posts: 84
Joined: Wed Sep 25, 2019 10:53 am America/New_York
Answers: 0
Has thanked: 1 time

Re: Methane data

by ASDC - mcook » Fri Mar 27, 2020 11:12 am America/New_York

Dear Stanislaus,

Global daily/monthly methane data sets are available from:

Earthdata Search:
https://search.earthdata.nasa.gov/searc ... 88590-LARC
https://search.earthdata.nasa.gov/searc ... 69510575!4!!

ASDC Data Pool:
ftp://l5ftl01.larc.nasa.gov/TES/TL3CH4D.006
ftp://l5ftl01.larc.nasa.gov/TES/TL3CH4M.005

Please let us know if we can be of further assistance.

GES DISC - jimacker
User Services
User Services
Posts: 311
Joined: Mon Sep 30, 2019 1:57 pm America/New_York
Answers: 3
Has thanked: 2 times
Been thanked: 4 times

Re: Methane data

by GES DISC - jimacker » Fri Mar 27, 2020 1:28 pm America/New_York

Stanislaus,

Hello. The Goddard Earth Sciences Data and Information Services Center (GES DISC) has methane data from the Atmospheric Infrared Sounder (AIRS). Provided below are links to an AIRS methane data product search, and also to the AIRS methane data in the Giovanni data visualization system.

We also have methane data from Sentinel-5 TROPOMI. At this time, there is not a global (Level 3) TROPOMI methane data set.

https://disc.gsfc.nasa.gov/datasets?key ... qua%20AIRS

In Giovanni; note that AIRS is an atmospheric sounder, so that it collects data at several different atmospheric pressure levels (indicated by hectoPascals, hPa). The higher values of hPA are nearer to the Earth surface; 925 hPA is the closest to sea level pressure. If you plot the methane data for that pressure level, areas at higher altitude, i.e., lower atmospheric pressure, will not show data. If you use Giovanni, you will be required to select a pressure level.

https://giovanni.gsfc.nasa.gov/giovanni ... t%3ACH4%3B

Jim Acker, NASA GES DISC

Post Reply