Announcement: SeaDAS 5.0 Update 01 available

Use this Forum to find information on, or ask a question about, NASA Earth Science data.
Post Reply
obdaac_forum_user
Posts: 86
Joined: Wed Jan 27, 2021 1:52 pm America/New_York
Answers: 0

Announcement: SeaDAS 5.0 Update 01 available

by obdaac_forum_user » Mon Aug 28, 2006 3:03 pm America/New_York

SeaDAS 5.0 Update 01 is now available on our ftp site.

Instructions for installing SeaDAS 5.0 Update 01
----------------------------------------------------------------------

This update provides:

- updates to the msl12 suite of processing programs,
to support new CZCS cal table and a new Morel Kd algorithm
- a new 256 color browse and map palette
- a new level 2 extracting program called MSl2extract
- new data files
- a fix for a problem loading CZCS SMI data files from the
command-line
- a fix for msl12 product selection
- a fix for a problem loading flat files graphics from the
GUI and command-line
- a fix for a problem with opening too many HDF files at one time

NOTE: If you have not installed SeaDAS 5.0 yet, you do not need to
install this update after installing the main software, since this
update is included in the main tar file distributions.

NOTE: If you installed SeaDAS 5.0 when it first came out, you will
need to install this update.

1. Go to your main $SEADAS directory:
cd $SEADAS
2. Anonymously ftp to samoa.gsfc.nasa.gov:
ftp samoa.gsfc.nasa.gov
3. After logged in, switch to binary mode:
bin
4. Change directory to where the update files are located:
cd seadas/seadas/update01
5. Get the zipped tar file for the update that corresponds to
your operating system:
get update01_rh73.tar.gz (for RedHat 7.3)
or
get update01_fc2.tar.gz (for Fedora Core 1 and 2)
or
get update01_fc4.tar.gz (for Fedora Core 4)
or
get update01_centos.tar.gz (for CentOS 4.2)
or
get update01_mac.tar.gz (for Mac OS-10.3)
or
get update01_sol28.tar.gz (for Solaris 2.8 64-bit)
or
get update01_sol27.tar.gz (for Solaris 2.7 64-bit)
or
get update01_irix.tar.gz (for Irix 6.5 32-bit)
6. Log off of ftp
bye
7. Unzip and extract the update files:
gunzip -c update01_rh73.tar.gz | tar xvf -
8. Change to the update01 directory:
cd update01
9. Make sure that your $SEADAS environment variable is set correctly:
setenv SEADAS /wherever/your/seadas5.0/is/located (for c shell)
or export SEADAS=/wherever/your/seadas5.0/is/located (for bash shell)
10. Run the update_01.csh script to install the files:
./update_01.csh
11. Run seadas_setup:
cd $SEADAS
seadas_setup OR seadas_setup -em
12. Enjoy and let us know if you have any problems.

The SeaDAS Development Group (seadas@seadas.gsfc.nasa.gov)

Tags:

Post Reply