About remap L2 files in matlab

Use this Forum to find information on, or ask a question about, NASA Earth Science data.
Post Reply
c_rojas
Posts: 1
Joined: Thu Oct 07, 2021 11:51 pm America/New_York

About remap L2 files in matlab

by c_rojas » Sun Feb 20, 2022 11:49 pm America/New_York

I hope this is the right place to ask this. I have downloaded L2 files for remote sensing reflectances and I'm working to have a consistent projection of the images. Using Matlab I have created a grid with a constant spacing (1km ~ 0.009º) and filled with the original data from the swaths:

dx = .009;
dy = .009;
[lnn,ltn] = meshgrid(30:dx:40,20:dy:35);

However, comparing two swaths one fill the grid in a more realistic way than the other even when they both have similar data coverage: In the image attached, in region (a) and (b) there were similar original data coverage but (b) is more consistent with the original data than (a). Hence my question, Is my kind of projection the right choice? Is there any remap technique advised to be used?
Attachments
Regions with same coverage data
Regions with same coverage data
image12.png (148.03 KiB) Not viewed yet

Tags:

Post Reply