subscription but without map and cannot subscribe to OCLI S3-B data

Use this Forum to find information on, or ask a question about, NASA Earth Science data.
Post Reply
leell
Posts: 2
Joined: Sun Mar 12, 2023 9:34 pm America/New_York
Answers: 0

subscription but without map and cannot subscribe to OCLI S3-B data

by leell » Sun Mar 12, 2023 9:41 pm America/New_York

Hello!
Excuse me, I would like to ask two questions.

One is that I have subscribed to many satellite data and map to may e-mail, but why my gmail did not receive the map, just some emails reminding me that the data subscription has been activated.

The other is when I subscribe to OCLI S3-B data, as shown in the figure below, it always reminds me "Extract data to region is selected. Please choose a value from L1 or L2 for each sensor.".
Attachments
111.png
111.png (79.79 KiB) Not viewed yet

Filters:

OB General Science - guoqingw
Subject Matter Expert
Subject Matter Expert
Posts: 79
Joined: Fri Jun 03, 2022 10:54 am America/New_York
Answers: 0
Location: NASA GSFC
Been thanked: 1 time
Contact:

Re: subscription but without map and cannot subscribe to OCLI S3-B data

by OB General Science - guoqingw » Fri Mar 17, 2023 12:36 pm America/New_York

So sorry for the delayed response. Our expert is looking into it.

OB ODPS - jgwilding
Subject Matter Expert
Subject Matter Expert
Posts: 139
Joined: Fri Feb 19, 2021 1:09 pm America/New_York
Answers: 0
Been thanked: 1 time

Re: subscription but without map and cannot subscribe to OCLI S3-B data

by OB ODPS - jgwilding » Fri Mar 17, 2023 12:58 pm America/New_York

Hi. I see these subscriptions for your user. They are not extracted subscriptions so there is no option for mapping or sending to email. Instead the files are staged for you to download via HTTP. The screenshot you provided is for creating a new extracted subscription. For those, you can choose to have the map images delivered to an email address. Do you know what product(s) you want to receive?

john

Code: Select all

 sub_id      mission                        create_date             start_date             
 ----------- ------------------------------ ----------------------- -----------------------
        3218 S3B-OLCI                       2023-02-27 03:56:38.450 2023-02-27 00:00:00.000
        3219 S3A-OLCI                       2023-02-27 03:56:38.453 2023-02-27 00:00:00.000
        3222 S3A-OLCI                       2023-03-08 01:43:33.156 2023-03-08 00:00:00.000
        3226 SNPP-VIIRS                     2023-03-09 02:01:19.000 2023-03-09 00:00:00.000
        3227 SNPP-VIIRS                     2023-03-09 02:01:19.066 2023-03-09 00:00:00.000
        3228 SNPP-VIIRS                     2023-03-09 02:07:19.496 2023-03-09 00:00:00.000
        3229 SNPP-VIIRS                     2023-03-09 02:07:19.496 2023-03-09 00:00:00.000

leell
Posts: 2
Joined: Sun Mar 12, 2023 9:34 pm America/New_York
Answers: 0

Re: subscription but without map and cannot subscribe to OCLI S3-B data

by leell » Sun Mar 19, 2023 10:38 pm America/New_York

Thank you very much for your reply! The product I want to choose is "SST and Chlorophyll a from VIIRS and OLCI".

For the first question, whether it is VIIRS or OLCI, I have selected Extract for all subscriptions, but in my subscription, Extraction Requests is not displayed. I am very confused about this. Can you help me see if Extraction is selected in the following picture (Figure 1), and is there any problem?


In addition, the second question, why can't OLCI extract, its error message is "Extract data to region is selected. Please choose a value from L1 or L2 for each sensor." Why is this? I have to choose L1 or L2 products.

Finally, is there a limit to my data subscriptions? Here I show that the existing subscriptions are
There are 7, but I want to try to add a new one. It is obvious that the subscription is successful, but the latest subscription is not displayed in my subscription.
Attachments
Extract data to region.png
Extract data to region.png (59.08 KiB) Not viewed yet

OB ODPS - jgwilding
Subject Matter Expert
Subject Matter Expert
Posts: 139
Joined: Fri Feb 19, 2021 1:09 pm America/New_York
Answers: 0
Been thanked: 1 time

Re: subscription but without map and cannot subscribe to OCLI S3-B data

by OB ODPS - jgwilding » Mon Mar 20, 2023 10:00 am America/New_York

I've attached screenshots of the main subscription page. If you select VIIRS and an OLCI sensor, you should see two tabs in the lower area, one for each of the sensors. Normally the L2 maps are already checked. I do see that SST is not listed as an available map for VIIRS although it should be. We don't make SST for OLCI. If you submit the subscription request, two different subscriptions will get made, one for each sensor. I can manually add SST to the VIIRS subscription after it is created.

john
subs_viirs_olci.png
subs_viirs_olci.png (202.49 KiB) Not viewed yet
subs_viirs_olci.png
subs_viirs_olci.png (202.49 KiB) Not viewed yet
Attachments
subs_viirs_olci_2.png
subs_viirs_olci_2.png (76.15 KiB) Not viewed yet

Post Reply