up to level SST and Ocean Color using SeaDAS 7.5. We are trying to
use NASA MOD00F and MYD00F data if and when the antenna is
disabled for more than a day. We downloaded four (4) MYD00F granules
for one day that cover our area of interest and proceesed them to level 3.
The Ocean Color L3 products were generated but the SST products were not.
Note that l2bin exits with a code 110 when processing L2 SST products.
I have attached the output of the l2bin and l3bin commands.
You log file shows you set
That would be what you would want for binning nighttime SST. The "
~" inverts the flag, so ~HISOLZEN will exclude all data that is NOT flagged as HISOLZEN. Not something you want to do on the bright side of the earth.
If that would, I can upload the L2_SST from DB data for 20181203 and the L2_SST from NASA data for 20181118
that I used with l2bin. However, it is a substantial amount of data.
ncdump -houtput for both the DB sourced and NASA L0 sourced L2 files should be sufficient (and small enough to attach to the forum - though please NOT inline)
These are a range of day, night and mixed (i.e. both day and night) granules.
Those with the attribute "Day or Night" set to "Night" or "Mixed" will work with your l2bin process as you've defined it (with flaguse=LAND,~HISOLZEN), but those with "Day" will not:
$ grep "Day or Night" *dmp
A20181118153000.gran.L2_SST.hdf.dmp: :Day or Night = "Day" ;
A20181118153500.gran.L2_SST.hdf.dmp: :Day or Night = "Day" ;
A20181118171000.gran.L2_SST.hdf.dmp: :Day or Night = "Day" ;
A20181118171500.gran.L2_SST.hdf.dmp: :Day or Night = "Mixed" ;
A20181203101624.gran.L2_SST.hdf.dmp: :Day or Night = "Night" ;
A20181203211747.gran.L2_SST.hdf.dmp: :Day or Night = "Day" ;