Cannot Reproject L1 Browse files using gpt

[alakes]

Hi,
I was trying to batch process MODISA files from L1 to L3. When I tried to reproject or Mosaic the Local Area Coverage L1 browse files using gpt (Reproject & Mosaic operator) it is showing the following error.

java.lang.NullPointerException
  at gov.nasa.gsfc.seadas.dataio.SeadasFileReader.<init>(SeadasFileReader.java:94)
  at gov.nasa.gsfc.seadas.dataio.BrowseProductReader.<init>(BrowseProductReader.java:44)
  at gov.nasa.gsfc.seadas.dataio.SeadasProductReader.readProductNodesImpl(SeadasProductReader.java:140)
  at org.esa.beam.framework.dataio.AbstractProductReader.readProductNodes(AbstractProductReader.java:173)
  at org.esa.beam.gpf.operators.standard.ReadOp.initialize(ReadOp.java:77)
  at org.esa.beam.framework.gpf.internal.OperatorContext.initializeOperator(OperatorContext.java:457)
  at org.esa.beam.framework.gpf.internal.OperatorContext.getTargetProduct(OperatorContext.java:236)
  at org.esa.beam.framework.gpf.Operator.getTargetProduct(Operator.java:323)
  at org.esa.beam.framework.gpf.graph.NodeContext.initTargetProduct(NodeContext.java:74)
  at org.esa.beam.framework.gpf.graph.GraphContext.initNodeContext(GraphContext.java:195)
  at org.esa.beam.framework.gpf.graph.GraphContext.initNodeContext(GraphContext.java:178)
  at org.esa.beam.framework.gpf.graph.GraphContext.initNodeContext(GraphContext.java:178)
  at org.esa.beam.framework.gpf.graph.GraphContext.initOutput(GraphContext.java:162)
  at org.esa.beam.framework.gpf.graph.GraphContext.<init>(GraphContext.java:91)
  at org.esa.beam.framework.gpf.graph.GraphContext.<init>(GraphContext.java:64)
  at org.esa.beam.framework.gpf.graph.GraphProcessor.executeGraph(GraphProcessor.java:124)
  at org.esa.beam.framework.gpf.main.DefaultCommandLineContext.executeGraph(DefaultCommandLineContext.java:84)
  at org.esa.beam.framework.gpf.main.CommandLineTool.executeGraph(CommandLineTool.java:508)
  at org.esa.beam.framework.gpf.main.CommandLineTool.runGraph(CommandLineTool.java:356)
  at org.esa.beam.framework.gpf.main.CommandLineTool.runGraphOrOperator(CommandLineTool.java:249)
  at org.esa.beam.framework.gpf.main.CommandLineTool.run(CommandLineTool.java:150)
  at org.esa.beam.framework.gpf.main.CommandLineTool.run(CommandLineTool.java:122)
  at org.esa.beam.framework.gpf.main.GPT.run(GPT.java:54)
  at org.esa.beam.framework.gpf.main.GPT.main(GPT.java:34)
  at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
  at java.lang.reflect.Method.invoke(Method.java:498)
  at com.bc.ceres.launcher.Launcher.launch(Launcher.java:154)
  at com.bc.ceres.launcher.Launcher.main(Launcher.java:56)

Error: java.lang.NullPointerException

But the brs file is opening in SeaDAS7.4 GUI and there I was able to reproject or mosaic these files.

Brs file is generated using the following command:
$SeaDASPath/run/bin/linux_64/l1brsgen ifile=$L1BFile ofile=$BrsFile geofile=$GEOFile atmocor=1 oformat=hdf4 oformat_depth=24bit subsamp=1 sline=1 \
eline=-999 spixl=1 epixl=-999 >$LogFile3

Gpt Command used for reprojection:
gpt.sh -e Reproject.xml -Ssource=$infile -PopReprojectFN=$ReprojOP

used xml file:(Reproject.xml)
--------------------------------------------------------------------------------------------------------------------------------------------------------------
graph id="Reproject">
  <version>1.0</version>
  <node id="Reprojection">
    <operator>Reproject</operator>
      <sources>
        <source>${source}</source>
      </sources>
    <parameters>
    <crs>GEOGCS["WGS84(DD)",
      DATUM["WGS84",
        SPHEROID["WGS84", 6378137.0, 298.257223563]],
      PRIMEM["Greenwich", 0.0],
      UNIT["degree", 0.017453292519943295],
      AXIS["Geodetic longitude", EAST],
      AXIS["Geodetic latitude", NORTH]]</crs>
    <resampling>Nearest</resampling>
    <orthorectify>false</orthorectify>
    <noDataValue>NaN</noDataValue>
    <includeTiePointGrids>true</includeTiePointGrids>
    <addDeltaBands>false</addDeltaBands>
   </parameters>
  </node>
  <node id="writeNode">
    <operator>Write</operator>
    <sources>
      <source>Reprojection</source>
    </sources>
    <parameters>
      <file>${opReprojectFN}</file>
      <formatName>NetCDF4-CF</formatName>
      <writeEntireTileRows>true</writeEntireTileRows>
      <clearCacheAfterRowWrite>false</clearCacheAfterRowWrite>
      <deleteOutputOnFailure>true</deleteOutputOnFailure>
    </parameters>
  </node>
</graph>
-------------------------------------------------------------------------------------------------------------------------------------------------------------

These commands and graph files were working fine before installing SeaDAS 7.4 but Now SeaDAS GUI can do the job but GPT can't.

** Tried with increasing gpt memory, seadas memory upto 16 Gb.

Is it a problem of l1brsgen or GPT ?

Any suggestion is welcome.

[OB SeaDAS - aynur]

Thank you for reporting this problem. We have identified a bug that affected gpt operators and have fixed it. Please update the "NASA OBPG Ocean Color Product Reader" module of SeaDAS 7.4.

From SeaDAS application window, go to "Tools" -> "Module Manager ..." -> and click on the "Module Updates" tab. It should display the new module. Select the new module and ensure it is updated.

Aynur

[alakes]

Thanks for the help..

cheers,

[oo_processing]

I have been trying to resolve this issue as well. When I follow the directions and click on the update module tab, it ends up freezing.
The JRE is defined in the seadas script as follows:
INSTALL4J_JAVA_HOME_OVERRIDE=/usr/java/jdk1.8.0_77/jre
See image attached.
Brock

[gnwiii]

For me, Module Manager takes a very long time to scan.  The progress bar often stalls, but usually starts to move again.  If it realy fails, you should get an error popup.

Since you know you want the seadas-reader-1.7.2 module, it is faster to update manually.  Some hints are given Module Manager Help.  This points you to preferences to get the Module Repository.  The "Note" at the bottom tells you how to install and remove modules manually.

[oo_processing]

Disregard the previous post. It appears that if you leave it long enough, it actually does finish scanning.
B

[oo_processing]

Thanks, the manual d/l and install was perfect!
B