Earthdata Forum

Likely same issue as this: https://oceancolor.gsfc.nasa.gov/forum/oceancolor/topic_show.pl?tid=6520
I have a cron that updates LUTS nightly. This is from last night:
[ VIIRS ]
+ IETTime.dat
+ polar_wander.h5
[ Sensor: VIIRSN ]
- OPER:VIIRS_NPP_CAL_DNB_DYNAMIC_LUT_v1.1.0.1_vcst.nc
- OPER:VIIRS_NPP_CAL_RSB_DYNAMIC_LUT_v1.1.0.1_obpg.nc
- OPER:VIIRS_NPP_CAL_STATIC_LUT_v1.1.0.1_obpg.nc
- OPER:VIIRS_NPP_CAL_STRAYLIGHT_DYNAMIC_LUT_v1.1.0.1_vcst.nc
- OPER:VIIRS_NPP_CMN_LUT_v1.1.0.1_vcst.nc
- OPER:VIIRS_NPP_GEO_LUT_v1.1.0.1_obpg.nc
+ OPER:VIIRS_NPP_CAL_DNB_DYNAMIC_LUT_v2.0.0.2_obpg.nc
+ OPER:VIIRS_NPP_CAL_RSB_DYNAMIC_LUT_v2.0.0.2_obpg.nc
+ OPER:VIIRS_NPP_CAL_STATIC_LUT_v2.0.0.2_obpg.nc
+ OPER:VIIRS_NPP_CAL_STRAYLIGHT_DYNAMIC_LUT_v2.0.0.2_obpg.nc
+ OPER:VIIRS_NPP_CMN_LUT_v2.0.0.2_obpg.nc
+ OPER:VIIRS_NPP_GEO_LUT_v2.0.0.2_obpg.nc
[ Done ]

Now all my processing is failing (because the  /optics1/software/seadas/seadas-7.3/ocssw/run/var/viirsn/cal/OPER/VIIRS_NPP_CMN_LUT_v1.1.0.1_vcst.nc was removed in the LUT update)

VcstCmnGeoNetcdfInputItem:: Failure opening LUT file: /optics1/software/seadas/seadas-7.3/ocssw/run/var/viirsn/cal/OPER/VIIRS_NPP_CMN_LUT_v1.1.0.1_vcst.nc
VcstCmnGeoNetcdfInputItem:: Failure reading netCDF file for LUT JPL_PLANET_EPHEM
VcstCmnGeo::Unable to read JPL

I also tried switching to seadas 7.4 and running it with the same failure:

Main:: Geolocating L1A V2017068200000.L1A_SNPP.nc

VcstCmnGeoNetcdfInputItem:: Failure opening LUT file: /optics1/software/seadas/seadas-7.4/ocssw/run/var/viirsn/cal/OPER/VIIRS_NPP_CMN_LUT_v1.1.0.1_vcst.nc
VcstCmnGeoNetcdfInputItem:: Failure reading netCDF file for LUT JPL_PLANET_EPHEM
VcstCmnGeo::Unable to read JPL.
Main:: Geolocation processing failure for v

Please advise.

Brock

See:
https://oceancolor.gsfc.nasa.gov/forum/oceancolor/topic_show.pl?pid=28037#pid28037