Unable to initialize SST file

Use this Forum to find information on, or ask a question about, NASA Earth Science data.
Post Reply
oo_processing
Posts: 242
Joined: Wed Apr 06, 2005 12:11 pm America/New_York

Unable to initialize SST file

by oo_processing » Thu Apr 27, 2017 10:34 pm America/New_York

I have two files that I'm processing to L2. The goes fine, and then both throw the error below. I have deleted the offending file N2017116_SST_OIV2AV_24h.nc, and had it downloaded again. Is there a problem with the file?

Begin MSl12 processing at 2017117111333000
....
Allocated 3677172 bytes in L1 record.
Loading radiance to brightness temperature from /optics1/software/seadas/seadas-7.3/ocssw/run/data/viirsn/cal/bt_viirsn.hdf
Loading land mask file from /optics1/software/seadas/seadas-7.3/ocssw/run/data/common/landmask_GMT15ARC.nc
Loading bathymetry mask file from /optics1/software/seadas/seadas-7.3/ocssw/run/data/common/watermask.dat
Loading ice mask file from /optics1/software/seadas/seadas_6.1/var/anc/2017/115/N201711500_SEAICE_NSIDC_24h.hdf
Loaded near real time NSIDC ice HDF file.
Loading elevation file from /optics1/software/seadas/seadas-7.3/ocssw/run/data/common/ETOPO1_ocssw.nc
Loading XCAL rvs and polarization sensitivities from /optics1/software/seadas/seadas-7.3/ocssw/run/var/viirsn/xcal/OPER/xcal_viirsn_v3_410.hdf
Loading XCAL rvs and polarization sensitivities from /optics1/software/seadas/seadas-7.3/ocssw/run/var/viirsn/xcal/OPER/xcal_viirsn_v3_443.hdf
Loading XCAL rvs and polarization sensitivities from /optics1/software/seadas/seadas-7.3/ocssw/run/var/viirsn/xcal/OPER/xcal_viirsn_v3_486.hdf
Loading XCAL rvs and polarization sensitivities from /optics1/software/seadas/seadas-7.3/ocssw/run/var/viirsn/xcal/OPER/xcal_viirsn_v3_551.hdf
Loading XCAL rvs and polarization sensitivities from /optics1/software/seadas/seadas-7.3/ocssw/run/var/viirsn/xcal/OPER/xcal_viirsn_v3_671.hdf
Loading XCAL rvs and polarization sensitivities from /optics1/software/seadas/seadas-7.3/ocssw/run/var/viirsn/xcal/OPER/xcal_viirsn_v3_745.hdf
Loading XCAL rvs and polarization sensitivities from /optics1/software/seadas/seadas-7.3/ocssw/run/var/viirsn/xcal/OPER/xcal_viirsn_v3_862.hdf
Loading DEM info from /optics1/software/seadas/seadas-7.3/ocssw/run/data/common/ETOPO1_ocssw.nc
-E- /data5/swdev/seadas/build/src/l2gen/sstref.c : Unable to initialize SST file
/optics1/software/seadas/seadas_6.1/var/anc/2017/116/N2017116_SST_OIV2AV_24h.nc

Tags:

OB SeaDAS - dshea
Subject Matter Expert
Subject Matter Expert
Posts: 240
Joined: Thu Mar 05, 2009 10:25 am America/New_York

Unable to initialize SST file

by OB SeaDAS - dshea » Fri Apr 28, 2017 12:20 am America/New_York

Well, the SST folks decided to change their file format a bit.  We modified our code today to account for the change.  Hopefully, all you need to do is update your processing programs and all will be fine. Sean posted a message about this today, but it is late and I can't seem to locate his announcement.

don

Post Reply