file olci cal file(s) missing n a new SeaDAS 7.5

[hfengg]

HI seadas team :

We just made a new seadas7.5 build from the source in a Linux box;
When l2gen is run on a S3A-olci data, it appears the file /usr/local/app/seadas-7.5/ocssw/share/olci/cal/band_info_olci.txt
( actually olci/cal/ ) is NOT there.
Any idea?
I see there is such a dir in seadas-7.4/. Can we use it in seadas-7.4/?
thanks,
hui

%%%%%%%%%
l2gen ifile=$l1FullFilename ofile=$l2FullFilename par=$parFilename l2prod1='Rrs_400,Rrs_412,Rrs_442,Rrs_490,Rrs_510,Rrs_560,Rrs_620,Rrs_665,Rrs_674,Rrs_681,Rrs_709,Rrs_754,Rrs_865,Rrs_940,Rrs_1012,chl_ocx,Kd_490,l2_flags,windspeed,senz,aot_865,angstrom' proc_land=1 brdf_opt=0

+ l2gen ifile=/disk2/olci/l1a/S3A_OL_1_EFR____20171001T152319_20171001T152619_20171001T172506_0179_023_011_2159_MAR_O_NR_002.SEN3/Oa01_radiance.nc ofile=/disk2/olci/l2//S3A_OL_1_EFR____20171001T152319_20171001T152619_20171001T172506_0179_023_011_2159_MAR_O_NR_002.l2 par=2017274152319.anc l2prod1=Rrs_400,Rrs_412,Rrs_442,Rrs_490,Rrs_510,Rrs_560,Rrs_620,Rrs_665,Rrs_674,Rrs_681,Rrs_709,Rrs_754,Rrs_865,Rrs_940,Rrs_1012,chl_ocx,Kd_490,l2_flags,windspeed,senz,aot_865,angstrom proc_land=1 brdf_opt=0
Input file /disk2/olci/l1a/S3A_OL_1_EFR____20171001T152319_20171001T152619_20171001T172506_0179_023_011_2159_MAR_O_NR_002.SEN3/Oa01_radiance.nc is OLCI L1B file.
Loading default parameters from /usr/local/app/seadas-7.5/ocssw/share/common/msl12_defaults.par
Loading default parameters for OLCI from /usr/local/app/seadas-7.5/ocssw/share/olci/msl12_defaults.par
Loading parameters for suite OC from /usr/local/app/seadas-7.5/ocssw/share/olci/msl12_defaults_OC.par
Loading command line parameters
Loading user parameters for OLCI
.....

Processing scans 1 to 4090 by 1
Ocean processing enabled
Land processing enabled
Atmospheric correction enabled

Begin MSl12 processing at 2018131130344000

Allocated 10659299 bytes in L1 record.
Allocated 10659299 bytes in L1 record.
Allocated 10659299 bytes in L1 record.
file->nbands = 21, l1rec->nbands = 21
E- /usr/local/app/seadas-7.5/ocssw/ocssw-src/src/l2gen/smile.c:88: unable to open /usr/local/app/seadas-7.5/ocssw/share/olci/cal/band_info_olci.txt for reading
exit 0
+ exit 0

[OB SeaDAS - dshea]

you need to install the OLCI data files

(assuming $OCSSWROOT is set properly)
$ install_ocssw.py --olcis3a

don

[hfengg]

thanks don, it works