Welcome to the Earthdata Forum! Here, the scientific user community and subject matter experts from NASA Distributed Active Archive Centers (DAACs), and other contributors, discuss research needs, data, and data applications.
by dem1 » Wed Oct 17, 2018 10:18 am America/New_York
We observed some rectangular pattern (aligned on a plate carrée grid) on the ATMWARN flag for this L2 product: V2018153003000.L2_SNPP_OC There are other L2 products with the same issue at least on next days on the same region, for MODISA and VIIRS. Is it normal? This cause rectangular holes on corresponding L3 products.
There are two types of conditions that will set ATMWARN. The first, and most common (and the source of the clever name), is when the derived epsilon value is outside an expected range for the aerosol model suite (epsilon is the ratio of the aerosol reflectance in the two -generally- NIR wavelengths used in the G&W atmospheric correction approach). The other condition is when one of the input ancillary records has a non-zero QC status set. The former condition will never generate regular shapes (e.g. rectangles) in the flag array. The latter will almost always do so. So, in this case it is quite likely that some QC status was set in the source ancillary files indicating lesser confidence in the data, thus the warning.