Regarding the switching threshold for NIR-SWIR AC

Use this Forum to find information on, or ask a question about, NASA Earth Science data.
Post Reply
maxi_arena
Posts: 2
Joined: Mon Oct 19, 2020 10:00 am America/New_York
Answers: 0

Regarding the switching threshold for NIR-SWIR AC

by maxi_arena » Mon May 23, 2022 7:29 am America/New_York

Hi,
Following switching threshold proposed by Liu et al (2019) https://doi.org/10.1016/j.isprsjprs.2019.04.013.
I’m trying to apply the switching scheme using the Rrs(645) > 0.009 sr−1 instead of the Turbidity index. I’m wondering if there’s any possibility to set it directly in the L2gen or should I process the NIR and SWIR AC and then, mersh the outputs without using Seadas?.

Tags:

OB.DAAC - SeanBailey
User Services
User Services
Posts: 1464
Joined: Wed Sep 18, 2019 6:15 pm America/New_York
Answers: 1
Been thanked: 4 times

Re: Regarding the switching threshold for NIR-SWIR AC

by OB.DAAC - SeanBailey » Fri Jun 17, 2022 8:08 am America/New_York

No, you cannot pass a parameter to l2gen to modify the Shi and Wang NIR/SWIR switching algorithm to use an Rrs_645 threshold in place of the turbidity index.

If you process both SWIR and NIR in separate runs you can use SeaDAS' Math Band operator to blend the output.

Sean

maxi_arena
Posts: 2
Joined: Mon Oct 19, 2020 10:00 am America/New_York
Answers: 0

Re: Regarding the switching threshold for NIR-SWIR AC

by maxi_arena » Thu Jun 23, 2022 9:27 am America/New_York

Thank you very much for your reply!.

Post Reply