Page 1 of 1

POWER LARC 2-meter hourly temperature data

Posted: Fri Aug 04, 2023 2:15 pm America/New_York
by thulohot
We have recently been comparing data obtained via POWER( to actual temperature measurements taken from meteorological stations. For the cases we have compared, there are major discrepancies between the data from the actual measured data and the modeled data provided through POWER. Is there a reason we are seeing such discrepancies (> 10°C) on hourly data?

Here is an example taken from the month of march 2022, with comparison taken from the Canadian historical weather data, which sources its information from (in this case) the Quebec airport meteorological station. The data from POWER was taken from the Sustainable buildings user community, which sources from MERRA-2 if I'm not mistaken.

The original csv/excel file was converted to PDF in order to attach it. Original file can be provided.


Re: POWER LARC 2-meter hourly temperature data

Posted: Thu Aug 10, 2023 2:42 pm America/New_York
by ASDC - David W.
Thank you for your question.

A Subject Matter Expert has been notified and will answer your question shortly.

Thank you,

David W.
NASA Langley ASDC DAAC Lifecycle

Re: POWER LARC 2-meter hourly temperature data

Posted: Mon Aug 28, 2023 1:33 pm America/New_York
by ASDC - c_mikovitz
The POWER data looks to be identical to the MERRA-2 hourly data with the adjustment for local time. Since the MERRA-2 data grid box size is 0.5 latitude x 0.625 degree longitude, the average elevation for the grid box is quite a bit larger than the surface site 332 m (MERRA-2) to 74 m. That may be the main difference you are seeing in temperatures. Beyond that, local conditions can be highly variable and MERRA-2 has inherent biases both of which contribute to differences.