V2024.1 modis sst processing (l2gen failed)
Posted: Tue Jul 23, 2024 11:03 am America/New_York
Dear Support,
I installed the V2024.1, modis sst processing failed, but which was successful with V2024.0; moreover, removing sst options, the l2gen ran successfully.
the following l2gen error message is for your info, the SSES LUT files are same between V2024.0 and V2024.1 (compared by the diff command)
Please advise
Yuyuan
I installed the V2024.1, modis sst processing failed, but which was successful with V2024.0; moreover, removing sst options, the l2gen ran successfully.
the following l2gen error message is for your info, the SSES LUT files are same between V2024.0 and V2024.1 (compared by the diff command)
Code: Select all
Product type to ini SST
MODIS AQUA correction to BT 4 micron for detector #0 will be applied
Reading the ADT parameters from the follwing file : /shares/cms_optics/apps/seadas/ocssw/V2024.1/share/modis/aqua/cal/cloud_mask_sst.json
The json file for the ADT has been read and processed succesfully
SST Coefficients file for product SST /shares/cms_optics/apps/seadas/ocssw/V2024.1/share/modis/aqua/cal/modis-aqua_sst_coeffcients_v6.5.nc
Scantime - unix time: 1.3194e+09; scan day : 23; scan month : 10; scan year : 2011
Targeted month 10
The regression coefficients used:
Lat_start : -90; lat_end : -40; Coefficients : C0 = 1.12914; C1 = 0.944699; C2 = 0.176167; C3 = 0.582462; C4 = 0.000393364; C5 = -0.000663995; C6 = 0.00015868;
Lat_start : -40; lat_end : -20; Coefficients : C0 = 1.59203; C1 = 0.942145; C2 = 0.131319; C3 = 0.996426; C4 = 0.00357337; C5 = -0.00205557; C6 = 0.00011453;
Lat_start : -20; lat_end : 0; Coefficients : C0 = 3.54954; C1 = 0.859181; C2 = 0.122114; C3 = 0.973169; C4 = 0.0045083; C5 = -0.00279223; C6 = 7.15743e-05;
Lat_start : 0; lat_end : 20; Coefficients : C0 = 5.54204; C1 = 0.786424; C2 = 0.115044; C3 = 0.875372; C4 = 0.015905; C5 = -0.00248624; C6 = 5.60631e-05;
Lat_start : 20; lat_end : 40; Coefficients : C0 = 1.58972; C1 = 0.947134; C2 = 0.126184; C3 = 1.2004; C4 = 0.0109738; C5 = -0.0027577; C6 = 6.75738e-05;
Lat_start : 40; lat_end : 60; Coefficients : C0 = 1.48187; C1 = 0.929723; C2 = 0.152238; C3 = 0.433296; C4 = 0.00847396; C5 = -0.00134302; C6 = 0.000196957;
Lat_start : 60; lat_end : 90; Coefficients : C0 = 1.51471; C1 = 0.886835; C2 = 0.239938; C3 = -0.755053; C4 = 0.0147818; C5 = -0.000564207; C6 = 0.0003038;
Error opening and reading SSES LUT file :
Exiting ...
Yuyuan